Site Information

shop by Category

CONNECT WITH US

 Loading... Please wait...
  • R1 Supply Standard Long End Snap Tie with Cones (100/Box).  Use with Snap Tie Wedges to construct a concrete retaining wall.
  • R1 Supply diagram displaying how Standard Long End Snap Tie with Cones are used when constructing a concrete retaining wall.  Plywood and Walers not included.  Snap Tie Wedges sold separately.

OCM STLEC-20 - 20" Standard Long End Snap Tie with Cones (100/Box)

$64.95
SKU:
OCM##-STLEC-20
Weight:
38.00 LBS
Availability:
Available
Shipping:
Calculated at checkout
Quantity:

Product Description

OCM STLEC-20 - 20" Standard Long End Snap Tie with Cones (100/Box)

Standard Snap Ties are manufactured with forged integral heads. Coating the tie ends with wax will aid in breakback operation.
For Long End or Short End Snap Ties, Snap Tie Wedges are required to lock the Snap Ties in place against the wales.  You can find them here.

Snap ties have a nominal 1 inch break back.

Each snap tie is fabricated with flats or crimps to prevent the snap tie from turning in the concrete during breakback operations.

  • Snap tie ultimate load is 4500 lbs
  • Safe Working Load is 2,250 lbs. which provides a factor of safety of approximately 2 to 1
  • Sold in boxes of 100

See below for a table displaying the quantity of required Snap Ties per Snap Tie Spacing.  This is based on 10,000 square feet of wall area or 20,000 square feet of form contact area.

Snap Tie Spacing Snap Ties Required
16" x 16" (1.77 square feet) 5650
24" x 24" (4 square feet) 2500
24" x 32" (5.33 square feet) 1877
32" x 32" (7.11 square feet) 1407
32" x 48" (10.67 square feet) 938
48" x 48" (16 square feet) 625
60" x 60" (25 square feet) 400

 

Specifications

Product Type Concrete Forming Snap Tie with Cones (Long End)
Item # STLEC-20
Dimensions 20" x 8.25"

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category