QUICK-LOCK PIER BOOT
Quick-LockTM Pier Boots are designed to support a reinforcing steel cage within a drilled shaft with a concrete cover requirement. They are also great for supporting reinforcing steel over waterproofing in mat foundations and providing vertical support of slurry walls. All our Quick-LockTM Pier Boots are made of durable, noncorrosive plastic. The 3″ Pier Boot attaches to rebar sizes #5 thru #14 and the 6″ Pier Boot attaches to rebar sizes #6 thru #14.
Without proper alignment, the rebar cage cannot perform the function for which it was designed. Faulty alignment can cause foundation failure, which often leads to issues of contingent liability. Because the rebar cage cannot be inspected or tested after the concrete is placed in the drilled shaft, the cage must be aligned properly the first time!
Installation is quick and easy! The recommended spacing for proper support is one Quick-LockTM Pier Boot on every other vertical bar for piers under 48 inches in diameter or one Quick-LockTM Pier Boot on every vertical bar for piers 48 inches in diameter and over.
|Product Type||Pier Boot|
|Size||Nominal 3-3/8 inch (86 mm) diameter by 6-1/4 inch (159 mm) high.|
|Bar Size||#5 thru #14|
|Quantity||50 / Box|
Pier Boots 2015