QUICK-ZIP BAR BOOSTER
Quick-ZipTM Bar BoostersTM are designed to support a reinforcing steel cage within a drilled shaft with a 3″ concrete cover requirement. They are also great for supporting reinforcing steel over waterproofing in mat foundations and providing vertical support of slurry wall mats. Our Quick-ZipTM Bar BoostersTM are made of durable, noncorrosive plastic and attach to any size rebar. The zip tie used for attachment is made of 170 pound tensile strength resin.
Without proper alignment, the rebar cage cannot perform the function for which it was designed. Faulty alignment can cause foundation failure, which often leads to issues of contingent liability. Because the rebar cage cannot be inspected or tested after the concrete is placed in the drilled shaft, the cage must be aligned properly the first time!
Our Quick-ZipTM Bar BoostersTM are a zip to install! Simply position the Quick-ZipTM Bar BoosterTM on the end of a vertical bar of the cage and pull the zip tie taut. Quick, easy installation in seconds! The recommended spacing for installation is one Quick-ZipTM Bar BoosterTM on every other vertical bar for piers under 48 inches in diameter, or one Quick-ZipTM Bar BoosterTM on every vertical bar for piers 48 inches in diameter and over.
|Product Type||Bar Booster|
|Size||Nominal 3 inch (75 mm) diameter by 3 inch (75 mm) high.|
|Quantity||50 / Box|
Pier Boots 2015